Husqvarna Factory Racing Titanium Pegs

The Husqvarna Factory Racing Titanium Footpegs are the ultimate lightweight, high-traction foot controls engineered directly by Husqvarna's factory racing division to replace heavy steel OEM footpegs on modern Husqvarna and KTM motorcycles. Footpegs are the primary physical interface through which a rider steers and controls the machine; standard pegs are narrow, heavy, and wear down quickly, compromising boot traction in muddy or wet racing conditions.

Precision-crafted from aerospace-grade Ti-6Al-4V titanium alloy, these factory pegs deliver an astonishing 40% weight reduction compared to standard steel pegs while offering virtually indestructible structural strength. The wide platform measures 60mm in width and features an aggressive perimeter array of sharp, pyramid-shaped titanium teeth. These teeth grip into the soles of motocross boots with relentless tenacity, ensuring the rider's feet never slip off the pegs during violent jump landings, deep rut carving, or slick muddy scrambles. The internal open-frame architecture features wide drainage ports that prevent mud, clay, and gravel from packing beneath the boot sole, keeping the pegs clear throughout long motos.

• Material: Aerospace-grade Ti-6Al-4V (Grade 5) titanium alloy
• Platform Dimensions: 60mm extra-wide platform width x 85mm length
• Tooth Profile: Precision pyramid-point perimeter teeth for maximum mechanical boot bite
• Mud Evacuation: Open central truss design for continuous mud and debris shedding
• Weight: Approx. 260 grams per pair (saving up to 40% over OEM cast steel footpegs)
• Mounting Clevis: Direct factory OEM pin and spring fitment

### Step-by-Step Installation & Safety Protocols Installation utilizes the factory footpeg pins, return springs, and cotter pins. Remove the cotter pin from the lower end of the stock footpeg pivot pin, slide the pin upward, and remove the stock peg and spring. Clean the frame clevis thoroughly and coat the pivot pin in waterproof synthetic grease. Position the Husqvarna Titanium footpeg into the frame mount alongside the return spring, slide the pivot pin through, and install a new stainless steel cotter pin, spreading the legs securely. Verify that the footpeg pivots upward freely and snaps down instantly under spring tension.

### Maintenance & Care Routine Maintenance involves washing with standard soap and water. The Ti-6Al-4V titanium alloy is completely impervious to rust and chemical corrosion. Check the frame clevis pins periodically for wear.

Frequently Asked Questions