Flo Motorsports Pro Series Footpegs
MSRP: $149.95
$119.96
Exact Fitment Guarantee
The Flo Motorsports Pro Series Footpegs are high-grade aftermarket footpegs designed to replace narrow, slippery OEM steel pegs that pack with mud and offer inadequate platform stability. Machined from solid aerospace-grade 7075-T6 billet aluminum, these pegs provide an exceptionally strong, lightweight foundation that withstands massive casing impacts and aggressive riding without bending or snapping. Measuring a generous 57mm wide by 86mm long, the wide platform dramatically increases the contact patch between the rider's boot sole and the machine.
The Pro Series pegs feature replaceable stainless steel cleats with an aggressive cone-tooth design. These sharp teeth lock into motocross boot treads, preventing feet from slipping off the pegs during muddy ruts, hard landings, or wet off-road conditions. Internal cavity cutouts are engineered with open relief channels that prevent mud and clay from packing underneath the boot, allowing debris to fall through continuously. On the track, the rider experiences superior chassis feedback, effortless weight transfer through corners, and significantly reduced foot fatigue during long motos.
- Platform Dimensions: 57mm width x 86mm overall length
- Material: Solid CNC-machined 7075-T6 billet aluminum
- Traction Cleats: Replaceable cone-point stainless steel cleats with pre-applied thread lock
- Debris Evacuation: Open-truss center cavity for maximum mud shed
- Weight: Approx. 380 grams per pair (significantly lighter than steel OEM units)
### Step-by-Step Installation & Safety Protocols Installation is straightforward and utilizes the factory footpeg pins, return springs, and cotter pins. Begin by removing the cotter pin or circlip from the bottom of the stock footpeg pivot pin, then slide the pin out while retaining the OEM spring. Clean the frame clevis area and apply fresh waterproof grease to the pivot pin. Position the Flo Motorsports peg into the clevis along with the spring, align the pivot holes, and slide the pin downward. Secure the pin with a new stainless steel cotter pin, bending the legs securely. Verify that the footpeg pivots upward smoothly and returns instantly via spring tension.
### Maintenance & Cleat Replacement Maintenance involves checking the tightness of the stainless steel cleat screws before riding (loctite is pre-applied, but routine torque checks are recommended) and replacing worn cleats as teeth become rounded over time. Inspect the frame clevis for wear and replace pivot pins if grooved.
Frequently Asked Questions
Q: Are the stainless steel teeth replaceable when they wear down?
A: Yes, Flo Motorsports provides replacement tooth cleat kits with fresh stainless steel hardware, so you can restore maximum grip without replacing the entire aluminum peg body.
Q: Do these footpegs lower or raise my riding position?
A: Flo Pro Series pegs feature a standard OEM height profile, maintaining factory ergonomics while providing a much broader and more stable platform.
Q: Can I adjust the angle of the footpegs?
A: Certain Flo Pro Series models feature adjustable clevis hardware allowing minor tilt adjustments; standard models maintain factory perpendicular alignment for optimum boot contact.
Q: How does 7075-T6 aluminum compare to standard cast steel pegs?
A: 7075-T6 aluminum delivers comparable structural yield strength to carbon steel at roughly half the weight, while offering superior resistance to bending under violent casing impacts.